Mi-171A2 and Ansat to take part in Airshow China and go on a demo tour of countries in Southeast Asia

31.10.2018 / Moscow
The holding company Russian Helicopters (part of Rostec State Corporation) will for the first time be presenting full-scale equipment samples at the exhibition in Asia - the Mi-171A2 and Ansat helicopters will be participating in the Airshow China 2018 flight program. Following the airshow, the helicopters will go on a demonstration tour of countries in Southeast Asia.

Mi-171A2 and Ansat to take part in Airshow China and go on a demo tour of countries in Southeast Asia

The Mi-171A2 and Ansat models have already arrived in China, where they are performing training flights before the opening of the airshow’s flight program. Guests and participants of Airshow China 2018 will be able to see the Russian helicopters in the air on every day of the show, which will run from November 6-11 in Zhuhai (China).

In addition, models of the Mi-171A2, Ansat and Ka-32 will be on display at the Russian Helicopters stand, and specialists of the holding will give presentations to potential customers about the competitive advantages of Russian-made helicopters.

“China is one of the key operators of helicopters not only in Asia, but worldwide. Today, there are more than 400 Russian helicopters registered in the country, but this market is continuing to expand rapidly, it needs modern civilian aircraft, and we are prepared to offer these. At Airshow China 2018, we will be presenting the Mi-171A2 and Ansat—models which have received particular interest from our Chinese partners. We have already begun the process of certifying these helicopters in China, the process will shortly be completed for Ansat, and for Mi-171A2 it will be completed by mid-2019,” said Andrey Boginsky, the Director General of Russian Helicopters.

After the airshow, the Mi-171A2 and Ansat helicopters will set off on a demo tour of countries in Southeast Asia. The almost 5 thousand kilometer route will pass through Hanoi (Vietnam), Phnom Penh (Cambodia), Bangkok (Thailand), and Kuala Lumpur (Malaysia). The tour will include demonstration flights, as well as events for partners and potential operators, where representatives of the holding will talk about the key benefits of Russian helicopters, their after-sales service system, and financial options to ensure a smooth procurement process.

"China is Rostec's largest strategic partner in various areas of aviation, including the helicopter-building industry. This is one of the main reasons for us to start the demo tour of our helicopters to Southeast Asia and China during Airshow China," said Anatoly Serdyukov, Rostec's Aviation Cluster Industrial Director. "Ansat and Mi-171A2 are modern civilian helicopters that are competitive in terms of price and quality. I am convinced that these machines will have strong positions in their market niches."

The Ansat is a light, multi-purpose twin-engine helicopter manufactured by Kazan Helicopters. In May 2015, a modification of the aircraft with a medical module passed certification. The module complies with all international air ambulance standards and can help in saving people’s lives. The helicopter is equipped with a mechanical ventilation system and a tele-ECG machine that is capable of reading a cardiogram in real time. According to the certificate, the design of the helicopter allows it to quickly be transformed into either a cargo or passenger helicopter with capacity for up to 7 people.

The Mi-171A2 is the latest modification of Mi-8/17 helicopters. It is equipped with VK-2500PS-03 engines with a digital control system, as well as a more efficient X-shaped tail rotor and a new main rotor with composite blades and an enhanced aerodynamic profile. The cruise and maximum speeds of the Mi-171A2 are 10% higher than those of the mass-produced Mi-8/17 helicopters, and the payload is 25% greater. The Mi-171A2 is equipped with the KBO-17 modern digital on-board equipment suite designed according to the “glass cockpit” principle, which has meant that the number of crew members can be reduced to two. The helicopter can be used as a passenger aircraft and is available in transport, passenger, and VIP versions.

JSC Russian Helicopters (part of Rostec State Corporation) is one of the world leaders in helicopter industry, the only developer and manufacturer of helicopters in Russia. The holding company was established in 2007. The head office is located in Moscow. The holding company is comprised of five helicopter plants, two design bureaus, enterprises for production and maintenance of components, aircraft repair plants and a service company providing after-sales support in Russia and abroad. The buyers of the holding company's products include the Russian Ministry of Defense, the Ministry of Internal Affairs, EMERCOM of Russia, and other state customers, Gazprom Avia and UTair airlines, as well as major Russian and foreign companies.


Rostec Corporation is a Russian corporation that was established in 2007 to facilitate the development, production and export of high-tech industrial products designed for civilian and military applications. The Corporation comprises over 700 organizations that are currently part of eleven holding companies operating in the military-industrial complex and four holding companies working in civilian industry, as well as over 80 directly managed organizations. Rostec's portfolio includes well-known brands such as AVTOVAZ, KAMAZ, Concern Kalashnikov, Russian Helicopters, UralVagonZavod, etc. Rostec companies are located in 60 constituent entities of the Russian Federation and supply products to the markets of more than 100 countries. In 2017 the consolidated revenue of Rostec reached 1 trillion 589 billion rubles, while the consolidated net income and EBITDA amounted to 121 and 305 billion rubles respectively. In 2017 the average salary in the Corporation was 46 thousand rubles. According to Rostec's strategy, the main objective of the Corporation is to ensure that Russia has a technological advantage in highly competitive global markets. Rostec's key objectives include the introduction of a new techno-economic paradigm and digitalization of Russian economy.